Bushnell 132050 PowerView 20x 50mm Porro Prism Binoculars
- 20x 50mm
- Multicoated optics
- Center focus
- Rubber armored
- 170ft field of view
You may also like
Cold Steel 97MKM Magnum Kukri Machete 17" Blade, Polypropylene Handle, Cor-Ex Sheath
Regular price $35.99 Sale price $22.99If you were suddenly castaway on a desert island or stranded in the wilderness or a jungle, what's the one tool you would want at your side? The answer is a good machete. You see the machete, over the last three centuries, has proven to be the ultimate outdoor and survival tool. It will cut, chop, slash, hack, split, scrape, scoop, hammer, dig, crush, carve, whittle, crack or smash just about anything you can put in front of it. The machete also makes a deadly improvised weapon. It can be used to kill both fish and game and will gut, scale, filet, skin, quarter, and butcher them for the table as well. And when you look at its meager cost, it's got to be one of the best bargains for hard earned cash in the world. In fact it's so cheap and useful that even the poorest peasant in South America or tribesman in Africa invariably owns one and counts on it as one of his most precious possessions.
These blades are made out of 1055 Carbon Steel with a tough spring temper and are surfaced with a black, baked-on anti-rust finish. Each Cold Steel® machete comes with a good utility edge which, with just a little work, can be made hair shaving sharp. The tough, Polypropylene handles of our machetes are designed to provide a comfortable secure grip, and they are rugged enough to resist chipping, cracking or breaking, so they last practically forever.
There's no single edged weapon that we can think of that can out-chop or out-cut a good Kukri. It's true that the best Kukris, like our LTC and Gurkha models, can be somewhat expensive. While those "thoroughbreds" perform extraordinarily well for the money that they cost, it sometimes seems that what's required is a good, inexpensive, "workhorse" model. The Cold Steel Kukri Machetes are those workhorses. They are available in a variety of blade sizes and built ready to plow through the toughest chores life can dish out. Each features the distinctive weight-forward balance of Cold Steel's "top-of-the-line" models, and always present their edge on an angle so they're guaranteed to "bite" deep with every stroke. Additionally, they come complete with a sturdy Cor-Ex™ sheath! They're a solid value, ready for long, hard work.
Features:
Warranty
All Cold Steel knifes are warranted against defects in materials and workmanship. Details are included with your purchase.
About Cold Steel
Cold Steel, Incorporated was founded in 1980, with the goal of making the strongest, sharpest cutlery in the world for knife enthusiasts. Over the last three-plus decades, the company has been at the forefront of many design innovations that have helped innovate the knife industry, including introduction of checked Kraton handles, and the tanto point blade styles which have become industry hallmarks of quality and sophistication.
Cold Steel 97KMPS Kukri Plus Machete 13" Carbon Steel Blade, Polypropylene Handles, Cordura Sheath
Regular price $31.99 Sale price $15.99If you were suddenly castaway on a desert island or stranded in the wilderness or a jungle, what's the one tool you would want at your side? The answer is a good machete. You see the machete, over the last three centuries, has proven to be the ultimate outdoor and survival tool. It will cut, chop, slash, hack, split, scrape, scoop, hammer, dig, crush, carve, whittle, crack or smash just about anything you can put in front of it. The machete also makes a deadly improvised weapon. It can be used to kill both fish and game and will gut, scale, filet, skin, quarter, and butcher them for the table as well. And when you look at its meager cost, it's got to be one of the best bargains for hard earned cash in the world. In fact it's so cheap and useful that even the poorest peasant in South America or tribesman in Africa invariably owns one and counts on it as one of his most precious possessions.
These blades are made out of 1055 Carbon Steel with a tough spring temper and are surfaced with a black, baked-on anti-rust finish. Each Cold Steel® machete comes with a good utility edge which, with just a little work, can be made hair shaving sharp. The tough, Polypropylene handles of our machetes are designed to provide a comfortable secure grip, and they are rugged enough to resist chipping, cracking or breaking, so they last practically forever.
There's no single edged weapon that we can think of that can out-chop or out-cut a good Kukri. It's true that the best Kukris, like our LTC and Gurkha models, can be somewhat expensive. While those "thoroughbreds" perform extraordinarily well for the money that they cost, it sometimes seems that what's required is a good, inexpensive, "workhorse" model. The Cold Steel Kukri Machetes are those workhorses. They are available in a variety of blade sizes and built ready to plow through the toughest chores life can dish out. Each features the distinctive weight-forward balance of Cold Steel's "top-of-the-line" models, and always present their edge on an angle so they're guaranteed to "bite" deep with every stroke. Additionally, they come complete with a sturdy Cor-Ex™ sheath! They're a solid value, ready for long, hard work.
Features:
Warranty
All Cold Steel knifes are warranted against defects in materials and workmanship. Details are included with your purchase.
About Cold Steel
Cold Steel, Incorporated was founded in 1980, with the goal of making the strongest, sharpest cutlery in the world for knife enthusiasts. Over the last three-plus decades, the company has been at the forefront of many design innovations that have helped innovate the knife industry, including introduction of checked Kraton handles, and the tanto point blade styles which have become industry hallmarks of quality and sophistication.
Cold Steel 90TA Trail Boss Drop Forged 27in Axe
Regular price $49.99 Sale price $31.99The Cold Steel Trail Boss is compact enough to carry all day in your hand or strapped to your pack, yet tough enough for chores that would make a hatchet or tomahawk scream for mercy. Featuring a European style head with a 4" blade and a 4 1/2" cutting edge, it takes a big bite with every swing. Plus, it features a very sturdy, durable straight-grained American Hickory handle. In our extensive field-tests in the outback of Australia, the Trail Boss was used to chop kindling, clear roads and trails, to build blinds and even to chop down a fair sized tree!
Features:
Warranty
All Cold Steel knifes are warranted against defects in materials and workmanship. Details are included with your purchase.
About Cold Steel
Cold Steel, Incorporated was founded in 1980, with the goal of making the strongest, sharpest cutlery in the world for knife enthusiasts. Over the last three-plus decades, the company has been at the forefront of many design innovations that have helped innovate the knife industry, including introduction of checked Kraton handles, and the tanto point blade styles which have become industry hallmarks of quality and sophistication.
Cold Steel 90N Norse Hawk Drop Forged 22in Tomahawk
Regular price $44.99 Sale price $19.99During the 10th century, Viking raiders were a familiar and dreaded sight. Ranging as far north as Russia and as far east as Constantinople, the Vikings wielded their terrible, fearsome battle axe. The influence of the Viking weapon indeed far out-lasted the reign of the Vikings themselves. Its sleek lines and brute strength may be seen today in axes, hatchets and tomahawks. The Cold Steel 90N Norse Hawk has a curved cutting edge to facilitate deep, slashing cuts and terminates in two sharp points which are useful in hand-to-hand combat. The bottom point may be used to capture an opponent's shield, leg, arm, shoulder or neck, momentarily immobilizing or bringing him closer so that he'll be easier to deal with. The top point may be used to execute direct chops or, with a thrusting motion, to pierce or gouge. The Norse Hawk is like its ancient Viking ancestors; merciless.
Drop Forged Tomahawks
These superb tomahawks are precision drop forged from 1055 carbon steel. Drop forging is, without doubt, the best method of manufacture for any impact weapon, particularly one with a cutting edge. During the forging process a metal ingot is heated almost white hot and then formed into shape in a series of progressive dies. The large steel dies are fixed to enormous compressed air hammers. Each die hammers the hot metal into a gradually more finished shape. The steel is kneaded and compressed into a completely homogeneous mass making the grain structure uniform and minimizing gas pockets or other imperfections that can ruin the construction of a hand forged hawk. This is why most good axes, hatchets and hammers are drop forged. These hawks are differentially heat treated. This means that the cutting edge and hammer face is fully hardened, while the balance is left relatively soft to absorb the shock of striking blows.
Features:
Warranty
All Cold Steel knifes are warranted against defects in materials and workmanship. Details are included with your purchase.
About Cold Steel
Cold Steel, Incorporated was founded in 1980, with the goal of making the strongest, sharpest cutlery in the world for knife enthusiasts. Over the last three-plus decades, the company has been at the forefront of many design innovations that have helped innovate the knife industry, including introduction of checked Kraton handles, and the tanto point blade styles which have become industry hallmarks of quality and sophistication.
Cold Steel 90FH Frontier Hawk Survival Hatchet
Regular price $44.99 Sale price $20.99Suitable for re-enactors from any period stretching from the French and Indian War clear up to the final settling of the West in the late 1800s. The authentic, good looking Frontier Hawk is one tough customer you're sure to appreciate. This light weight Hawk is a joy to use too as it reduces wrist, elbow and shoulder strain without sacrificing anything in chopping power or ease of handling. The merits of its light weight are revealed in combat too because the Frontier Hawk can be used at light speed from any angle and immediately recovered!
Drop Forged Tomahawks
These superb tomahawks are precision drop forged from 1055 carbon steel. Drop forging is, without doubt, the best method of manufacture for any impact weapon, particularly one with a cutting edge. During the forging process a metal ingot is heated almost white hot and then formed into shape in a series of progressive dies. The large steel dies are fixed to enormous compressed air hammers. Each die hammers the hot metal into a gradually more finished shape. The steel is kneaded and compressed into a completely homogeneous mass making the grain structure uniform and minimizing gas pockets or other imperfections that can ruin the construction of a hand forged hawk. This is why most good axes, hatchets and hammers are drop forged. These hawks are differentially heat treated. This means that the cutting edge and hammer face is fully hardened, while the balance is left relatively soft to absorb the shock of striking blows.
Features:
Warranty
All Cold Steel knifes are warranted against defects in materials and workmanship. Details are included with your purchase.
About Cold Steel
Cold Steel, Incorporated was founded in 1980, with the goal of making the strongest, sharpest cutlery in the world for knife enthusiasts. Over the last three-plus decades, the company has been at the forefront of many design innovations that have helped innovate the knife industry, including introduction of checked Kraton handles, and the tanto point blade styles which have become industry hallmarks of quality and sophistication.
Cold Steel 95BBUSK Bowie Bushman Fixed Blade Knife Dagger
Regular price $24.99 Sale price $17.99For the money, the Bushman series of survival knives are hard to beat! Unlike the majority of hollow handled knives, there is no joint or seam between the blades and handles, instead the Bushman’s blade and handles are cold forged out of a single piece of SK-5 high carbon steel! The resulting knives are expertly heat-treated and tempered to RC54 and, when subjected to our tests, have withstood over two tons of pressure on their blade/handle transition! Every Bushman has been carefully ground to an extra thin edge, and then honed and buffed by hand until razor sharp. Their hollow handles will accept survival supplies or a variety of handle extensions which can maximize reach, leverage or ease of throwing. Available in two blade styles (Standard and Bowie point) both feature curved blades that are ideal for skinning and a multitude of bushcraft chores. Both come complete with a Secure-Ex sheath which houses a high-quality Ferrocerium Fire Steel.
Features:
Warranty
All Cold Steel knifes are warranted against defects in materials and workmanship. Details are included with your purchase.
About Cold Steel
Cold Steel, Incorporated was founded in 1980, with the goal of making the strongest, sharpest cutlery in the world for knife enthusiasts. Over the last three-plus decades, the company has been at the forefront of many design innovations that have helped innovate the knife industry, including introduction of checked Kraton handles, and the tanto point blade styles which have become industry hallmarks of quality and sophistication.